Addonics Technologies DVD R/RW - Manual (Page 12)

USB driver installation
For Win98 and Win98SE
1. Make sure your computer is up and running.
2. Insert the USB cable to the USB Port.
3. A "New Hardware Found" message shall pops up.
4. Follow the ON SCREEN wizard and point to the location of
A:\USBWIN98 for the driver.
5. Let Windows finish the installation and that’s it.
6. Double click My Computer icon and there should be an extra
drive letter for the DVD DigiCopier drive.
7. You may now access the drive.
Note: USB DVD DigiCopier is Plug and Play under Windows XP, and
Me, 2000. There is no third party driver needed.
Note: When the DVD DigiCopier is used on a Computer, Only the
DVD±R/RW drive at the bottom of the DVD DigiCopier will Work. The
Regular DVDROM drive will be DISABLED
Addonics Technologies – DVD±R/RW DigiCopier Users Guide v1.0 11