Xerox DocuColor 2240-1537 - Manual (Page 62)

2–56
U S E R G U I D E (P R I N T )
Secure Print Select when you want to output secure prints.
Sample Print Select when you want to output sample prints.
NOTE: The Collated setting must be selected in the Page Setup
tab when using Job Type.
Delayed Print Select when you want to output delayed prints.
User ID Displays the User ID for Job Type. The User ID displayed is the
User ID specified on the Configuration tab. This option can only be
selected when the setting on the Configuration tab has been
completed. This is a display-only item and cannot be changed in
User ID.
Password Displays the Job Type password specified in the Configuration
tab. Each digit entered is displayed as an asterisk (*). This option
can only be selected when the setting on the Configuration tab
has been completed. This is a display-only item and cannot be
changed in Password.
Retrieve Document Name Select the method of specifying the document name. If you have
selected Auto Retrieve, the valid document name can be up to 24
alphanumeric characters.
Document Name When “Enter Document Name” is selected in the Stored
Document Name list, you can specify a document name with a
maximum of 24 alphanumeric characters.
Start Print Time Set the time that you want Delayed Print to be carried out. Place
the cursor in the hour or minute box and press the up or down
triangle to specify the starting time. You can also set the time by
entering the time directly into the boxes.
• The default setting is 00:00