Xerox DocuColor 2240-1537 User Manual
Page 74
2–68
U
S E R
G
U I D E
(P
R I N T
)
Transparency Separators
Specify whether to use transparency separators and the source of
the separators.
Select Auto for three paper source to automatically feed from the
paper tray with paper of the same size and in the same orientation
as the transparencies.
NOTE:
When using Transparency Separators, be sure to load
paper of the same size and in the same orientation as
transparencies into the paper tray.
NOTE:
The Transparency Separators function cannot be used in
the following situations:
•
When anything other than Manual feed is selected for
Paper source in the Paper/Quality tab.
•
When anything other than Transparency is selected for
Media type in the Paper/Quality tab.
•
When anything other than Center Output Tray is selected
for Output Destination in the Advanced Options tab.
•
When print on both sides is selected.
Bypass Feed Orientation
Specify the paper orientation when printing from the bypass tray.
When you set the short side of the paper in the bypass tray feed
direction, select Landscape. When you set the long side of the
paper in the bypass tray, select Portrait.
Paper Type (Bypass Tray)
Select the type of the paper set in the bypass tray.
Print Mode
Specify whether to give priority to the print speed or the image
quality. The printer/copier is capable of printing at three different
resolutions:
High Speed: 600 x 600
Standard: 1200 x 600
High Quality: 1200 x 1200
To change resolution settings, use the Print Mode selections.
NOTE:
The Image Enhancement feature is not available when
Standard or High Quality is selected.
Output Color
Specify your output printing options select either Color or Black.