Xerox WorkCentre M165-M175-3093 - Manual (Page 107)

Quick Reference Guide Page 5-27
Fa
x
Phone List The Phone List can store up to 30 fax numbers. Enter the fax number and select
Phone List. Select an empty number and then select Enter Number In Phone List,
the number will be stored. Fax numbers in the Phone List can be selected to add to
the Send List. Entries displayed in the Phone List will not be deleted once a fax job
has been completed.
To delete an entry from the Phone List, select the number requiring deletion and
select the Delete Phone List Number button. A confirmation message displays.
Resolution
The Resolution affects the appearance of the fax at the receiving fax terminal. A
higher resolution yields better quality for photos. A lower resolution reduces
communication time.
Options:
Standard 200 x 100 dpi - Recommend for text documents. It requires less communication
time, but does not produce the best image quality for graphics and photos.
P ASSWORD C HECK
S WITCH [S]
Used for remote terminal identification. This character
verifies that the correct number has been dialed.
P ULSE -T O -T ONE
S WITCH [:]
Use to switch from Pulse dialing to Tone dialing.
W AIT FOR N ETWORK
T ONE D ETECTION [W]
Use to suspend dialing until an expected network tone is
detected.
L OCAL ID [+]
C HARACTER C HECK
[+]
Required as part of some international telephone numbers (in
place of 00).
L OCAL ID [ SPACE ]
C HARACTER C HECK
[]
Used to improve readability. For example, adding spaces to a
telephone number as 1 234 5678 instead of 12345678.