AeroGarden PRO - Manual (Page 3)

Page 3
Remove Pump and Clean Pump Tower
Follow the steps whether your are cleaning a Pump from a planted
AeroGarden or an empty AeroGarden.
Unplug your AeroGarden.
Remove Bowl from Base.
Remove Grow Surface from Bowl and bring to sink or set on towel.
Hint: Lift the View Door and slide one hand into the Bowl to lift.
Remove Filter from the back of the Pump Tower and
rinse under hot water or discard if you have a new Filter.
(Missing or torn Filter? See Troubleshooting on Page 7.)
Turn Grow Surface upside down and remove Cover Plate.
1 Insert flat-head screwdriver at an angle into rectangular
slot on right side of Pump Tower and gently push down
on screwdriver.
2 Repeat step “1” on rectangular slot on left side
of Pump Tower.
A
B
C
D
E
Filter
Grow Surface
Cover Plate
Pump
Pull Pump Wire from Wire Slot but
keep it attached to Grow Surface.
Rinse out any residue or roots from
Pump and Pump Tower in sink. It is
okay to get everything (the Pump,
Pump Wire and Grow Surface) wet.
G
H
1
2
2
F
Remove the Pump by inserting the flat-head screwdriver
into the space under the Pump. Push down on the handle
of the screwdriver to lift the Pump out of the Pump Tower.