Alamo SL60 - Manual (Page 91)

OPERATION
SL60 03/08 Operation Section 4-7
© 2008 Alamo Group Inc
OPERA
T
ION
3.5 Auxiliary Hydraulics
The skid steer must be equipped with Front
Auxiliary Hydraulics. The hydraulic output capacity
of the skid steer must match the equipped mower
drive motor. Reference the skid steer operator’s
manual to determine the hydraulic output
specifications of the skid steer.
A decal is affixed to the mower designating the
mower as equipped with either a High, Medium, or
Low Flow Motor. If the decal is missing or is not
legible, the motor flow volume can be determined
from its part number (found on tag attached to the
motor) using the table to the right or by contacting
Servis-Rhino customer service.
The mower is not shipped equipped with hydraulic
hose coupler ends. Coupler ends must be
purchased from an authorized skid steer dealer to
ensure mower and skid steer auxiliary hydraulic
couplers are compatible
.
Part Number Flow Volume
00776387 LOW
00776388 MEDIUM
00776389 HIGH
4. GETTING ON AND OFF THE SKID STEER
Before getting onto the skid steer, the operator must read and completely understand the implement and skid
steer operator manuals. If any part of either manual is not completely understood, consult an authorized
dealer for a complete explanation. OPS-SS- 0002