AT&T 2320 - Manual (Page 47)

TELEPHONE OPERATION
PROBLEM SOLUTION
If your telephone • If you have dial pulse (rotary) service,
misdials: you’ll need to set the dial method to
. Follow the instructions under
“Set Dial Method”in the FEATURE SETUP
section of this manual.
• If you have touch tone service and you
hear clicks while you are dialing, you’ll
need to set the dial method to
.
Follow the instructions under “Set Dial
Method”in the FEATURE SETUP section
of this manual.
PROBLEM SOLUTION
If you are unable If you have dial pulse (rotary) service,
to operate special follow the directions under “Temporary
telephone services Tone Dialing”in the TELEPHONE
or other equipment OPERATION section of this manual.
requiring touch tone
signals:
CALLER ID
PROBLEM SOLUTION
If the caller’s • Make sure you subscribe to Caller ID
name or phone service from your local telephone
number is not company.
displayed: • Make sure the battery is charged.
• Caller ID service might not work when
the phone is connected to a Private
Branch Exchange (PBX).
4 4