AT&T 2320 - Manual (Page 7)

4
3 Install the handset battery.
Use only AT&T Battery 3301,SKU# 91076.
4 Charge the handset battery.
•
Place the handset in the base.
• Charge the battery for at least 12 hours. After the first
charge,the battery will charge in eight hours.
5 Check for dial tone.
•
After the batteries are ch a rge d , lift the handset and pre s s
; you should hear a dial tone.
b) Plug the battery pack
connector into handset.
Place the battery pack and
wires in the compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c ) Replace cover by
sliding it on its
t ra ck up over
b a t t e ry case until
it snaps fi rm ly
into place.