Adobe 2018 - Manual (Page 21)

Installing the Software
15
2
Important
❒ If your system is Windows NT 4.0,
we recommend that you upgrade
the Windows NT 4.0 operating
system to Service Pack 4 or later
before installing the PCL 6/5e or
RPCS™ printer drivers. Contact
your Windows retailer for more in-
formation about latest versions.
Note
❒ When the machine is connected to
the computer using the USB 2.0 in-
terface or the IEEE 1394 interface,
Quick Install cannot be used. See
p.30 “Installing the Printer Driver
Using USB”, p.32 “Installing the
Printer Driver Using IEEE 1394”.
AAAA
Quit all applications running.
BBBB
Insert the CD-ROM into the CD-
ROM drive.
Auto Run will start the installer.
CCCC
Select a language for the interface
language, and then click [OK].
The following languages are avail-
able: Cestina (Czech), Dansk (Dan-
ish), Deutsch (German), English
(English), Espanol (Spanish), Fran-
cais (French), Italiano (Italian),
Magyar (Hungarian), Nederlands
(Dutch), Norsk (Norwegian), Pol-
ski (Polish), Portugues (Portu-
guese), Russian (Russian), Suomi
(Finnish), Svenska (Swedish)
The default interface language is
English.
DDDD
Click [Quick Install].
The software license agreement
appears in the [License Agreement]
dialog box.
EEEE
After reading through the agree-
ment, click [I accept the agreement]
to agree, and then click [Next].
FFFF
Click the machine model you are
using when the [Select Printer] dia-
log box appears.
Note
❒ For TCP/IP network connec-
tion, select the machine whose
IP address is displayed in the
[Connect To]
column.
❒ For parallel connection, select
the machine whose printer port
is displayed in the[Connect To]
column.
GGGG
Click [Install].
HHHH
Follow the instructions on the
screen.
A message prompting you to re-
start your computer may appear.
To complete installation, restart
your computer.
Important
❒ If the machine has options in-
stalled, you should make set-
tings for them using the printer
driver. See p.20 “Setting Up Op-
tions - PCL 6/5e and RPCS”.
Note
❒ If you want to change the print-
er name, follow the procedure
below:
• Windows 95/98/Me, Win-
dows 2000, and Windows
NT 4.0
On the [Start] menu, point to
[Settings]
, and then click
[Printers] . The [Printers] win-
dow appears. Right-click the
machine icon, and then click
[Rename]
.
KirC2-EN-Pref1-F_FM.book Page 15 Thursday, September 25, 2003 3:15 PM