Adobe 2018 - Manual (Page 24)

Preparing to Print
18
2
❖ ❖ ❖ ❖ NetBEUI
A Click [NetBEUI], and then
click [Search].
A list of machines that can
be used with NetBEUI ap-
pears.
B Select the machine you
want to use, and then click
[OK]
.
Note
❒ NetBEUI cannot be used
under Windows XP or
Windows Server 2003.
❒ Machines that respond to
a broadcast from the com-
puter will be displayed.
To print to a machine not
listed here, click [Specify
Address]
, and then enter
t h e N e t B E U I a d d r e ss .
Confirm the NetBEUI ad-
dress on the network is on
the configuration page.
F o r m o re in f o rm a t ion
about printing the config-
uration page, see "Printer
F ea ture s Pa ram ete rs",
Printer Reference 2. The
NetBEUI address appears
as “\\RNPxxxx\xxx” on
the configuration page.
Enter the machine's net-
work path name in the
form of "%%Computer
name\Share name". Do
not enter "\\" but "%%" as
head characters.
❒ You cannot print to ma-
chines beyond routers.
❖ ❖ ❖ ❖ IPP
A Click [IPP].
The IPP setting dialog box
appears.
B To specify the IP address
of the machine, enter
"http://machine's-ip-
a d d r e s s / p r i n t e r " o r
"ipp://machine's-ip-ad-
d r e s s / pr i n t e r " in t h e
[Printer URL]
box.
(Example: IP address is
192.168.15.16)
http://192.168.15.16/
printer
ipp://192.168.15.16/
printer
C If necessary, enter the
names to distinguish the
machine in the [IPP Port
Name]
box. Enter a differ-
ent name to those of any
existing port name.
If you do not do this, the
address entered in the
[Printer URL]
box will be set
as the IPP port name.
D If a proxy server and IPP
user name are used, click
[Detailed Settings]
, and then
configure the necessary
settings.
Note
❒ For more information
about these settings, see
SmartDeviceMonitor for
Client Help.
E Click [OK].
JJJJ
Make sure the location for the se-
lected machine appears after
[Port:]
.
KKKK
Configure the user code and de-
fault printer as necessary.
KirC2-EN-Pref1-F_FM.book Page 18 Thursday, September 25, 2003 3:15 PM