ADIC 2 - Manual (Page 3)

FastStor 2 Installing or Removing a Barcode Reader 3
All barcode labels are applied to the front of the cartridge. Depending on the media type, barcode labels are
either stickers that are adhered to the front of the tape cartridge or cutouts that you slide into an indentation
on the front of the cartridge.
• Peel off the label and place it on the cartridge. Verify that label is oriented so the numbers appear
right-side up and above the barcode. See
Figure 2 and Figure 3 .
Figure 2 LTO Cartridge Barcode Placemen
CAUTION
Be careful not to apply barcode labels upside down.