Alloy Computer Products RNS5 - Manual (Page 7)

Bottom View
The bottom view of the RNS5/8 Industrial 5-port/8-port Ethernet Rail Switch
consists of one terminal block connector with two DC power inputs, Alarm output
and one DC IN power jack for an additional AC/DC power adapter.
Figure B. Bottom view of the RNS5/8 Industrial 5-port/8-port Ethernet Rail Switch
Wiring the DC Power Inputs
Follow the steps below to wire RNS5/8 dual DC power inputs.
[Note] The suitable electric wire ranges from 12 to 24 AWG.
V- V+ V- V+
1. Insert the positive and negative wires into the V+ and V-
contacts respectively of the terminal block connector
2. Tighten the wire-clamp screws to prevent the DC wires
from being loosened.
5 [Note] The additional power jack is designed for office use.