Alloy Computer Products RNS5 - Manual (Page 10)

Blinks
The port is transmitting or receiving
packets from the TX device.
Off No device is attached.
Orange
The port is operating in full-duplex
mode.
Blinks Collision of packets occurs. FDX/COL of Port 7/8
Off
The port is in half-duplex mode or
no device is attached.
Port LED Status Description
Orange
The port is operating in full-duplex
mode.
Blinking
orange
Collision of Packets occurring.
Off
The port is in half-duplex mode or
no device is attached.
Green A network device is detected.
Blinking
green
The port is transmitting or receiving
packets from the TX device.
Port Status (Port 1
to Port 6)
Off No device is attached.
Table 2
Ports
RJ-45 ports (Auto MDI/MDIX): RNS5 has five 10/100 Mbps auto-sensing ports
for 10Base-T or 100Base-TX device connection. The UTP ports will auto-detect
10Base-T and 100Base-TX connections. Auto MDI/MDIX allows users to connect
another switch or workstation without changing straight through or crossover
cabling. See Figure C and C-1 for the schematic diagram of straight through and
crossover cabling.
8