Power saving modes – AVERATEC 2300 User Manual

Page 46

Advertising
background image

Chapter 4

44

Do not restart the computer until you have connected to an AC
adapter, or replaced the discharged battery with a charged battery.

Battery Charging

When you use the AC adapter to connect your Notebook to a power
outlet, the internal battery will automatically begin to recharge. While
the battery is charging, the Battery Charge icon on the Indicator panel
will be active. When the battery is fully charged, the Battery Charge
icon will turn off.

If your computer is turned off or standby mode, a fully discharged
battery will take about 3 hours to recharge.

Note: A fully charged battery can run the Notebook for approximately
4 hours. (Pentium-M 1.4GHz)

Power Saving Modes

Adjust the default power management settings in the Power Options/
Advanced dialog box in the Control panel.

The Power Options

Properties dialog box allows you to set different actions to take when
the computer is left idle for a certain amount of time.

Suspend Mode

There are several possible settings for suspend mode, which can be
selected in the Power Management dialog box: You may have the
not ebook standby, suspend, or you can power off the computer
altogether.

Initiating Suspend Mode

There are four ways to initiate suspend mode. The settings can be
adjusted in the Power Management dialog box:

 The computer will automatically enter suspend mode when not

used for a set period of time.

 Selecting the Stand by button in the Shut Down Windows dialog

box.

Advertising