Clock functions, Electronic programmer, Setting the clock functions – AEG BP8715001M User Manual
Page 11
Electronic programmer
1
Function indicators
2
Function indicators
3
Time display
4
Button "+"
5
Selection button
6
Button "-"
4
5
6
1 2
3
2
CLOCK FUNCTIONS
Clock function
Application
Time of day
Shows the time. To set, change or check the time.
Minute minder
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration
To set how long the oven has to be in operation.
End
To set the switch-off time for an oven function.
Duration and End can be used at the same time, if the oven is to be switched on and
off automatically later. In this case first set Duration , then End .
Setting the clock functions
1.
Set an oven function and temperature (necessary only for Duration and End).
2.
Push the Selection button again and
again until necessary function indicator
flashes.
3.
To set the time for Minute minder ,
Duration or End , use "+" or "-"
button.
The related function indicator comes on.
When the time period is completed, the
function indicator flashes and an acous-
tic signal sounds for 2 minutes.
With the functions Duration and End the oven stops automatically.
4.
Push any button to stop the signal.
Clock functions
11