Asus A8R-MVP - Manual (Page 132)

5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
Setting the Stripe Size Setting the Stripe Size Setting the Stripe Size Setting the Stripe Size Setting the Stripe Size
To set the stripe size:
1.
From the ULI RAID BIOS Setup utility menu, move the cursor to
S t r i p e S i z e
S t r i p e S i z e S t r i p e S i z e S t r i p e S i z e S t r i p e S i z e then press <Enter>.
2. Use the up or down arrow keys to select a stripe size then press
<Enter>.
3. The stripe size is displayed beside the Stripe Size menu item.
T I P : T I P : T I P : T I P : T I P : For server systems, we recommend using a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
Drive Model Mode Capacity RAID Array/Type
Channel 0 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 1 Master: XXXXXXXXXXX XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 3 Master: XXXXXXXXXXX SATA 2 XXXXX MB
Capacity RAID Type Stripe Size RAID Name
RAID Array A : XXXXX MB JBOD RAIDJ
RAID Array B :
RAID Array C :
5. Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
6. The utility displays the RAID Array settings at the bottom of the
screen.