AEG L61470BI - Manual (Page 28)

10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
WARNING!
Remove all the packaging and
the transit bolts before you install
the appliance. We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
13.2 Positioning and levelling
• Install the machine on a flat hard floor.
• Make sure that air circulation around
the machine is not impeded by car-
pets, rugs etc.
• Carefully level by screwing the adjust-
able feet in or out.
28 www.aeg.com