Raising the appliance, 3 the inlet hose – AEG L61470BI User Manual

Page 29

Advertising
background image

• After having levelled the appliance,

tighten the lock nuts.

• The appliance must be level and sta-

ble.

Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.

If it is impossible to avoid positioning
the machine next to a gas cooker or
coalburning stove, an insulating panel
covered with aluminium foil on the side
facing the cooker or stove, must be in-
serted between the two appliances.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.

CAUTION!
The machine must not be instal-
led in rooms where the tempera-
ture can drop below 0°C.

Raising the appliance

Suspended wooden floors are particular-
ly susceptible to vibration
. To help prevent vibration we recom-
mend you place a waterproof wood pan-
el, at least 15 mm thick under the appli-
ance, secured to at least 2 floor beams
with screws, the wood panel must ex-
tend beyond the front feet.
If possible install the appliance in one of
the corners of the room, where the floor
is more stable

13.3 The inlet hose

20

O

20

O

20

O

45

O

45

O

45

O

• Connect the hose to the appliance.

Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.

ENGLISH

29

Advertising
This manual is related to the following products: