AEG Voxtel S100 - Manual (Page 28)

28
Note:
The respective ringer melody will be played while browsing the melody
list.
t
Press
OK
to confirm.
10.4.2 Set the ringer volume
t
Press and
/ to select “BS SET”.
t
Press
OK
and / to select “RING VOL”.
t
Press
OK
and / to select the desired ringer volume (a total of 6
ringer volume levels including “OFF”).
Note:
The respective ringer volume will be played during your selection.
t
Press
OK
to confirm.
10.4.3 De-register a handset
This operation should only be necessary if one of your handsets becomes
faulty or lost and needs to be replaced. You will need to enter the 4-digit
system PIN (Default PIN is 0000) in order to de-register a handset from the
base station. A de-registered handset will have the antenna flashing and
“--UNREG--” on the display.
t
Press and
/ to select “BS SET”.
t
Press
OK
and / to select “DEL HS”.
t
Press
OK
and the display shows “PIN?---”.
t
Enter the 4-digit system PIN.
t
Press
OK
and the first handset number is displayed.
t
Press
/ to step through the list of registered handsets, and select
the number of the handset you want to de-register.
t
Press
OK
to confirm, and the chosen handset will be de-registered.
10.4.4 Change the recall (flash) time
You may need to change the recall (flash) time if your phone is connected
to a PBX.
The recall time options are “SHORT” (the default value of 100ms), “MID”
(280ms) or “LOING” (600ms).
t
Press and
/ to select “BS SET”.
t
Press
OK
and / to select “FLASH”.