Aastra Telecom CM-16 - Manual (Page 6)

5 Model CM-16 User Guide
Base Station (continued)
To wall mount the base station:
• Locate the wall mounting strip located on the back side of the base station
• Slide the strip out from the base station (Fig A)
• Turn the strip around and secure firmly to the wall using the screws
supplied (Fig B)
• Plug the line cord into the jack on the unit
• Slide the base station over the strip until it clicks into place (Fig C)
Charging Cradle
The charging cradle is designed to be placed on a desk or any similar flat
surface in the vicinity of the base station. To set up the charging cradle:
1. Plug the appropriate power adapter plug into the bottom of the
charging cradle.
2. Plug the other end of the power adapter into an AC outlet. It is
recommended that the adapter should not be plugged in to an electrical
power bar and should be the only item plugged in to the AC outlet.
Figure A Figure B Figure C
CM16.book Page 5 Friday, June 18, 2004 3:22 PM