AEG L61470BI - Manual (Page 8)

The display shows:
A • The programme time
When the programme starts, the time decreases with steps of 1 mi-
nute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button 4 flashes.
•
When the programme is completed.
B Door lock
• You cannot open the appliance door when the symbol is
on.
• You cannot open the appliance door when the symbol
flashes. Wait for some minutes before you open the
door.
• You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
C The child lock symbol
The symbol comes on when you activate this device.
5.4 Start/Pause button 4
Press button 4 to start or interrupt a
programme.
5.5 Delay start button 5
Press button 5 to delay the start of a
programme from 30 minutes to 20 hours.
5.6 Time save button 6
Press the button 6 to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button 7
Press button 7 to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.8 Spin button 8
Press this button to:
8 www.aeg.com