AEG T86585IH User Manual

Page 16

Advertising
background image

THE DRY PLUS FUNCTION

This function helps to get the laundry
more dried. There are 3 possible selec-
tions:
minimum - the default selection which
is related to the programme.
moderate — the selection to get the
more dried laundry.
maximum — the selection to get the
much more dried laundry.

THE ANTICREASE FUNCTION

Extends of 30, 60, 90 or 120 minutes the
standard anticrease phase (30 minutes)
at the end of the drying cycle. This
function prevents the laundry from
creases. The laundry can be removed
during the anticrease phase.

THE SPUN AT RPM FUNCTION

This function helps to set the best con-
dition to dry the laundry. If you know
the initial spin speed when you washed
you can use this function. Higher spin
speed causes that the laundry contains
less water.

THE BUZZER FUNCTION

When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.

THE TIME DRYING FUNCTION

Operates only with the Time pro-
gramme. Lets the user to set special
time of drying programme from mini-
mum 10 min. to maximum of 2 hours (in
10 min. steps).

THE DELAY START FUNCTION

Let to delay the start of a drying
programme from minimum of
30 minutes to maximum of 20
hours.

1. Set the drying programme and

functions.

2. Push the Delay start button again

and again until the necessary time
of the delay come into the view on
the display (e.g. if the pro-
gramme has to start after 12 hours.)

3. To activate the Delay start function,

push the Start/Pause button. The
time to start decreases on the dis-
play.

CHILD LOCK FUNCTION

The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push but-
tons and the programme dial (this func-
tion does not lock Auto/Off button). To
activate the child lock function push the
Dry Plus and Anticrease buttons at the
same time until the symbol come in-
to view on the display. To deactivate
push again the above buttons until the
symbol go out of view.
You can activate the child lock function:
• before you push the Start/Pause but-

ton - the appliance cannot start

• after you push the Start/Pause button

- all the push buttons and the pro-
gramme dial are deactivated

STARTING A PROGRAMME

To activate the programme push the
button as on the illustration. The LED
above the button illuminates in red col-
our.

16

Advertising