Settings, 1 acoustic signals – AEG L75480FL User Manual
Page 11
At programme start the display shows the duration programme for the
maximum load capacity. During the washing phase the programme du-
ration is automatically calculated and can be greatly reduced if the laun-
dry load is lower than the maximum load capacity (e.g. Cotton 60°C,
maximum load capacity 7 kg, the programme duration exceeds 2 hours;
real load 1 kg, the programme duration don’t reach 1 hour). When the
appliance is calculating the real programme duration a dot blinks in the
display.
Programmes
Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme du-
ration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60 °C
7
1.10
60
180
52
Cottons 40 °C
7
0.90
60
160
52
Synthetics 40 °C
3.5
0.70
50
100
35
Delicates 40 °C
3
0.50
65
80
35
Wool/Silk 30 °C
2
0.40
55
60
30
Standard cotton programmes
Standard 60 °C cot-
ton
7
0.91
53
207
52
Standard 60 °C cot-
ton
3.5
0.69
43
155
52
Standard 40 °C cot-
ton
3.5
0.46
44
150
52
1) At the end of spin phase.
Off Mode (W)
Left On Mode (W)
0,48
0,48
The information given in the chart above are in compliance with the EU Commission regu-
lation 1015/2010 implementing directive 2009/125/EC.
7. SETTINGS
7.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Stains and Extra Rinse at
the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
ENGLISH
11