AEG AquaSense AWFLJL3 - Manual (Page 4)

4
English
Introduction to AquaSense™ and
PUREADVANTAGE™
1. Top Cover Large Jug
2. Top Cover Small Jug
3. Filter
4. Container Unfiltered water
5. Life Time Indicator
6. Large Jug
7. Small Jug
Thank you for choosing AquaSense™ with
PUREADVANTAGE™ filter technology
How to use and store
To ensure high quality, excellent filtration performance
and great tasting water please follow the instructions .
1. How to get started
• Remove Life Time Indicator before cleaning the
jug.
• Clean all parts of the jug in the dishwasher or by
hand.
• After cleaning put back the Life Time Indicator and
activate it:
The Life Time Indicator reminds you when it is time to
change the PUREADVANTAGE™ filter. Each dot refers
to a lifetime of about one week. The recommended
lifetime of four weeks (30 days) equals four dots
(100%). After each week one circle will disappear to
show the remaining filter life time.
This is how the Life Time Indicator works:
1. Push the STATUS button to activate the display.
2. To see the status of the filter; press the button
once. For example; when four blinking lights are
visible the filter is 100% new with four weeks of
usage.
3. To reset the timing press the button.
4. Change the filter when all the lights are blinking.
2. Change fiter
• Wash your hands
• Open the filter packaging and place the
PUREADVANTAGE™ filter in the hopper.
• Push the filter downwards until it fits firmly and is
placed in line with the bottom of the hopper.
How to activate the filter:
o Place the jug under the tap and fill the jug twice.
o Discard the filtered water before start using the
jug.
3. Usage of AquaSense ™:
Place the Jug under the tap inposition with the pour
through filling lid
4. AquaSense™ Capacity
• Large Jug: 1.6 liters filtered water capacity (2.3
liters total capacity)
• Small Jug: 1.2 liters filtered water capacity (1.6
liters total capacity)
5. Lifetime for the PUREADVANTAGE™ filter
• The PUREADVANTAGE™ filter achieves a filter
capacity of approximately 150 liter of tap water.
• We recommend changing the PUREADVANTAGE™
filter after 30 days to keep optimized
performance.
• To change the filter; pull the ring on the
PUREADVANTAGE™ filter. See : - 2. Change filter –
Store the PUREADVANTAGE™ filter
Store the sealed PUREADVANTAGE™ filter in a cold and
dry place in no direct sun light sealed in the plastic
packaging to keep the optimized performance of your
filter.
Care of AquaSense™ and the PUREADVANTAGE™
filter
• We recommend to store your jug in a cool
and shady place and remember that water is a
foodstuff. See also ”Hygiene”
• The AquaSense™ Jug (excluding the Life Time
Indicator) is dish washer safe.
Before cleaning your AquaSense™ Jug in the dish
washer, remove the Life Time Indicator.
• Use only batteries type LITHIUM CR2032. Batteries
must be removed from the appliance before it is
scrapped and are to be disposed of safely
Important Notes
Ideal Conditions for useage of AquaSense™ and
PUREADVANTAGE™ filter
• AquaSense™ and PUREADVANTAGE™ filter are
designed for use only with municipally treated tap
water or with water from private supplies which
has been tested as safe to drink.
• Use cold tap water only (water temperature
between 4 and 38 Celsius degrees).
• Always discard the first two jugs of filtered water
when changing to a new PUREADVANTAGE™ filter.
• The PUREADVANTAGE™ filter technology can
reduce the temporary hardness of tap water.
Therefore people with heart disease and
those who must follow a controlled diet are
recommended to ask their doctor before using
the PUREADVANTAGE™ water filter.