Control panel, Frostmatic function, High temperature alarm – AEG A61900HLW0 User Manual

Page 22

Advertising
background image

To operate the appliance, proceed as follows:
• turn the Temperature regulator towards to

obtain the minimum coldness.

• turn the Temperature regulator towards to

obtain the maximum coldness.

A medium setting is generally the most suitable.

However, the exact setting should be chosen keeping in mind that the temperature in-

side the appliance depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.

CONTROL PANEL

1

2

3

4

1

High temperature alarm light

2

Pilot light

3

FROSTMATIC light

4

FROSTMATIC switch
Alarm reset switch

FROSTMATIC function

You can activate the FROSTMATIC function by pressing the FROSTMATIC switch.

The FROSTMATIC light will light up.

This function stops automatically after 52 hours.

It is possible to deactivate the function at any time by pressing FROSTMATIC switch. The

FROSTMATIC light will switch off.

High temperature alarm

An increase in the temperature in the freezer (for example due to an power failure) is

indicated by:
• switching on of the Alarm light
• sounding of buzzer.

During the alarm phase, the buzzer can be switched off by pressing the Alarm reset switch.

During the alarm phase, don't place food inside the freezer.

When normal conditions are restored the Alarm light will switch off automatically.

22

Control panel

Advertising