Arcam AVR surround amplifier / AV processor AVR600 - Manual (Page 36)

E-34
VCR VCR device Mode
The w Device Mode button configures the CR102
to control the functions of a video recorder or similar
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects VCR as the AVR500/AVR600/AV888 source.
P Toggles power between standby and on.
0 … 9 Functions as original remote number key.
PHONO
E
Selects Tape input on AVR500/AVR600/
AV888.
ShiFT + E selects phono input on the
AVR600/AV888.
TV/AV
r
Toggles between available inputs (e.g. AV1,
AV2)
S
Modifies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel ( MCh ) input on
AVR500/AVR600/AV888.
ShiFT + H selects AuX input on the
AVR500/AVR600/AV888.
NET
e
Selects ipoD input on AVR500/AVR600/
AV888.
ShiFT + e selects network ( nET) internal
input on the AVR500/AVR600/AV888.
OK
Navigate setup and programme selection
menus.
oK is equivalent to ‘Enter’ or ‘Select’ on
some remotes.
M
Operates the Exit function if the VCR uses
this feature
U
Turns on the Menu function if the VCR
uses this feature
D Toggles display between TV and VCR
@
Toggles the mute function, if available.
By default this key operates the AMP Mute
] Channel down
[ Channel up
- + Decrease (
– ) and increase ( + ) AVR500/
AVR600/AV888 volume
) Fast rewind
$ Play
& Toggles pause of playback
( Fast forward
! Ejects tape
# Stop playback
% Starts recording
h (not used)
u
(RED)
Duplicates function of RED key (if used)
t
(GREEN)
Duplicates function of gREEn key (if used)
o
(yELLOw)
Duplicates function of yEllow key (if used)
b
(BLUE)
Duplicates function of BluE key (if used).
PVR PVR device Mode
The v Device Mode button configures the CR102
to control the functions of a video recorder or similar
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects pVR as the AVR500/AVR600/AV888 source.
P Toggles power between standby and on.
0 … 9 Functions as original remote number key.
PHONO
E
Selects Tape input on AVR500/AVR600/
AV888.
ShiFT + E selects phono input on the
AVR600/AV888.
TV/AV
r
Toggles between available inputs (e.g. AV1,
AV2)
S
Modifies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel ( MCh ) input on
AVR500/AVR600/AV888.
ShiFT + H selects AuX input on the
AVR500/AVR600/AV888.
NET
e
Selects ipoD input on AVR500/AVR600/
AV888.
ShiFT + e selects network ( nET) internal
input on the AVR500/AVR600/AV888.
OK
Navigate setup and programme selection
menus.
oK is equivalent to ‘Enter’ or ‘Select’ on
some remotes.
M
Operates the Exit function if the PVR uses
this feature
U
Turns on the Menu function if the PVR
uses this feature
D Toggles display between TV and PVR
@
Toggles the mute function. By default this
key operates the AMP Mute
] Channel down
[ Channel up
- + Decrease (
– ) and increase ( + ) AVR500/
AVR600/AV888 volume
) Fast rewind
$ Play
& Toggles pause of playback
( Fast forward
!
Operates the Favourites function if the PVR
uses this feature.
# Stop playback
% Starts recording
h (not used)
u
(RED)
Duplicates function of RED key (if used)
t
(GREEN)
Duplicates function of gREEn key (if used)
o
(yELLOw)
Duplicates function of yEllow key (if used)
b
(BLUE)
Duplicates function of BluE key (if used).