AEG EM 5512 - Manual (Page 31)

English
31
Initial Operation
• Assemble the blades as shown in illustration 1 (Abb.1).
• Insert the ends of the knives into the retainer on the mo-
tor device.
• Press the blades in the direction of the motor device until
the ends are felt to lock in place. Check that they are
firmly attached.
Electrical Connection
Insert the plug in a duly installed socket.
Switching on
NOTE:
• Please note that for safety reasons the knife can only be
switched on if switches 2 and 3 pressed.
• Do not exert too much pressure when cutting; allow
the knife to do the cutting.
Stopping Operation
• After use remove the plug from the socket.
• Press button (1) to remove the blades.
Cleaning
WARNING:
• Remove the mains plug from the socket.
• The cutting blades are extremely sharp!
• Under no circumstances should you place the device in water for
cleaning. Otherwise this might result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Housing
Wipe off the housing with a damp cloth and dry with a dry
cloth.
Blades
• These parts can be cleaned by hand in soapy water.
• Rinse off with clear water and dry the parts off.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 84.1 dB(A) (no limit)
Technical Data
Model: ..................................................................................EM 5512
Power supply:...........................................................230 V~, 50 Hz
Power consumption:.............................................................. 180 W
Protection class: ................................................................................II
Net weight: .............................................................................0.75 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.