AEG BMG 5612 - Manual (Page 83)

English
83
10. Measurement range:
Cuff pressure: 0 – 300 mm Hg
Systolic: 60 – 260 mm Hg
Diastolic: 40 – 199 mm Hg
Pulse rate: 40 – 180 beats/minute
11. Accuracy:
Pressure: 3 mm Hg
Pulse rate: 5 %
12. Environmental temperature for operation: +5 °C to +40 °C (41 °F to 104 °F)
13. Environmental humidity for operation: ≤ 90 % RH
14. Environmental temperature for storage and transport: -20 °C to 55 °C (-4 °F to 131 °F)
15. Environmental humidity for storage and transport: ≤ 95 % RH
16. Environmental pressure: 80 kPa to 105 kPa
17. Battery life: Approx 300 measurements
18. A list of all components belonging to the pressure measuring system, including acces-
sories: Pump, valve, LCD, cuff, sensor
Note:
These specifications are subject to change without notice.
NOTICES
1. Read all of the information in the operation guide and any other literature in the box
before operating the unit.
2. Stay still, calm and rest for 5 minutes before blood pressure measurement.
3. The cuff should be placed at the same level as your heart.
4. During measurement, neither speak nor move your body and arm.
5. Measuring on same arm each time.
6. Please always relax at least 1 or 1.5 minutes between measurements to allow the blood
circulation in your arm to recover. Prolonged over-inflation (cuff pressure exceed
300 mm Hg or maintained above 15 mm Hg for longer than 3 minutes) of the bladder
may cause ecchymoma of your arm.
7. Consult your physician if you have any doubt about below cases:
1) The application of the cuff over a wound or inflammation diseases;
2) The application of the cuff on any limb where intravascular access or therapy, or an
arterio-venous (A-V) shunt, is present;
3) The application of the cuff on the arm on the side of a mastectomy;
4) Simultaneously used with other monitoring medical equipments on the same limb;
5) Need to check the blood circulation of the user.