AEG BMG 5612 - Manual (Page 93)

English
93
of 10,000 measurements or three years, and the cuff can maintain the performance
characteristics for a minimum of 1000 measurements.
10. It is recommended that the cuff should be disinfected 2 times every week if needed (for
example, in a hospital or in a clinic). Wipe the inner side (the side that contacts skin) of
the cuff with a soft cloth moistened with ethyl alcohol (75-90%) and squeezed, then dry
the cuff by airing.
EXPLANATION OF SYMBOLS ON UNIT
Symbol for ”THE OPERATION GUIDE MUST BE READ”
Symbol for “WARNING”
Symbol for “TYPE BF APPLIED PARTS” (the cuff is a type BF applied part)
Symbol for “ENVIRONMENT PROTECTION” - Waste electrical products should
not be disposed of with household waste. Please recycle where facilities exist.
Check with your local Authority or retailer for recycling advice.
Symbol for “MANUFACTURER”
Symbol for “COMPLIES WITH MDD93/42/EEC REQUIREMENTS”
Symbol for “DATE OF MANUFACTURE”
Symbol for “EUROPEAN REPRESENTATION”
SN
Symbol for “SERIAL NUMBER”
Symbol for “KEEP DRY”