Bay Technical Associates BayStack Fiber Media Adapter - Manual (Page 4)

2 893-863-A
BayStack 10BASE-FL RDN Media Adapter
The BayStack 10BASE-FL RDN Media Adapter is a modular
10BASE-FL port.
The port is compatible with the IEEE 802.3 10BASE-FL
specification for Ethernet running over 62.5/125
µ
m or
50/125
µ
m multimode fiber optic cable.
10BASE-FL (fiber link) asynchronous signaling is fully
interoperable with fiber optic interrepeater link (FOIRL). Remote
signaling and redundant links are also supported. The redundant
10BASE-FL media adapter provides Rem (remote) and Rdn
(redundant) status LEDs. Jumpers allow you to set remote and
redundant link configuration.
Connection is made to the port using two fiber optic straight-tip
(ST) connectors (Tx and Rx).
For more information on fiber optic cable connection and
limitation, see “Fiber Optic Cable Length Limitations” later in
this guide.
5957
Rem
Rdn
TX
10BASE-FL RDN
RX