AEG MMR 4133 - Manual (Page 27)

English
27
Save station
1. If you have found the desired station, push the MEM
button (7). The memory location (e.g. P 02) will be shown
in the display and the information “FM” in the display will
blink.
2. For choosing the memory position, please press /
buttons (2).
3. Press MEM to save the settings.
Select a preset station
1. To select the stored stations, first press the PRESET but-
ton (17).
2. Now select the memory location with the /
buttons (2).
Connection of external devices
AUX IN jack (11)
Connect analogue playback devices. When connecting to
this jack you may also listen to the audio of other devices,
such as MP3 or CD players etc., via the speakers.
1. Please connect the external device via 3.5 mm plug jack
to the AUX IN jack.
2. Now use MODE button (16) to select AUX mode.
3. The speakers transmit the audio of the external device.
Use the volume control (10) to adjust the volume.
4. For further functions please refer to the user manual of
the external audio device.
NOTE:
Set the volume of the external device to a proper audible
level.
USB port (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is
not a malfunction of the device.
1. Directly connect a USB storage medium to the respec-
tive port. The device automatically switches into the USB
operation. USB appears on the display. Playback then
begins. The elapsed playing time and the symbol “ “
are shown in the display.
NOTE:
• Always directly connect a USB storage medium to
the USB port to prevent any malfunctions.
• The USB connection is not suitable for charging
external devices.
2. Operation:
• Skip to the next, previous title respectively with the
/ buttons (2). If you keep the buttons pressed
down, a music search will start.
• You can interrupt the replay with the button (4).
The symbol “ “ and the elapsed playing time will
blink in the display. If you push the button again, the
replay will start in the same location.
• Press the button (8) to stop playback.
• Repeatedly press the button (1) to change the
type of replay. REPEAT ALL is selected by default. All
the titles are continuously repeated. The following
are available for selection:
REPEAT = he current title is continually repeated
(“ONE” will briefly appear in the display)
REPEAT FOLDER = The current folder is continually
repeated (“FoLd” will briefly appear in the display)
CAUTION:
Before you remove the USB memory medium, switch the
device to Radio operation.
Memory card slot (14)
1. Insert the memory card into the intended opening. The
device will automatically switch into the CARD operation.
CARD appears on the display. Playback then begins. The
elapsed playing time and the symbol “ “ are shown in
the display.
For operation, please refer to the section “USB port / point 2”.
Always keep the cover closed when not using it.
CAUTION:
Before you remove the memory card, switch the device to
Radio operation.
Cleaning and maintenance
CAUTION:
Do not immerse the appliance in water.
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
Troubleshooting
Problem Cause Solution
The unit
cannot be
operated The unit is blocked
and “hangs” Pull the mains plug for
approximately 5 seconds.
Then connect the unit
again
No sound Volume is too low Increase the volume