Bush Hog 00786976C - Manual (Page 26)

ASSEMBLY
160 Series 08/10 Assembly Section 3-2
© 2010 Alamo Group Inc.
ASSEMBL
Y
Assembly of Moldboard to Mainframe
The Bush Hog 160 Series is shipped in two bundles. The Mainframe, A-Frame and Moldboard Carrier are in
one bundle; the Moldboard is in the second bundle. The assembly of the Moldboard to the Moldboard Carrier is
made by inserting the Moldboard Pivot Pin and securing with Screws.
Until Hydraulic Cylinders are connected and under pressure of Manual Adjusting Links
installed, block Moldboard to Moldboard Carrier to prevent possible tilting and falling from
stand.