Bush Hog 00786976C - Manual (Page 56)

MAINTENANCE
160 Series 08/10 Maintenance Section 5-2
© 2010 Alamo Group Inc.
MAINTENANCE
Lubrication
The Bush Hog 160 Series is a rugged, dependable
Blade that should perform satisfactorily with the
following preventive maintenance:
Lubricate the Moldboard Pivot Pin (Figure Mnt-
0002) and the Moldboard Tilt Pin (Figure Mnt-
0001) after every 10 hours of operation. Decals are
placed in locations about the implement indicating
locations of Grease Fittings.
Replace excessively worn Grader Blade when
ditching. A badly worn cutting edge increases the
strain on the Blade and the tractor and reduces
efficiency.
If the Gauge Wheel is used, a Grease Fitting is
provided at the Caster Pivot location, and on wheel
hub.