Body Solid 1.3 User Manual
Page 11
Since your treadmill is a heavy piece of equipment, we recommend that after taking off the top
portion of the box, you slit the corners of the lower carton and fold down the sides. This will
eliminate the need for you to pick up the treadmill over the sides of the box.
We also recommend that you use 2 people to assemble your treadmill, as some of the parts need
to be held in place while the electrical connectors are pushed together.
Prior to starting the assembly process take all of the parts out of the box, remove all plastic bags,
and lay them out of the floor to become familiar with the components. Make sure that you
remove all parts packaged underneath the treadmill. You may need to slightly pick up the back of
the treadmill to get better access to the parts on the bottom. You will notice that the treadmill is
completely assembled except for the handlebars and the display.
The following is a complete list
of all parts included:
1. Treadmill Assembly
2. Right Side Handlebar
3. Left Side Handlebar
4. Right Side Handlebar Support Post
5. Left Side Handlebar Support Post
Inside Display Box
6. Display Console
7. Power Cord
8. Handlebar Caps (2)
9. Safety Key
10. Hardware Parts Bag
Locate the plastic bag, found in the display box. This bag includes the hardware required to
complete the assembly of your softstride treadmill.
a. 5mm Allen Wrench
b. 6mm Allen Wrench
Used for belt tensioning
c. Long 5mm Flat Head Screws (4)
Used to attach the handlebars to the Handlebar Support Posts
7
b
a
c
1
. Treadmill
Assembly
4. Right Side
Handlebar
Support Post
5. Left Side
Handlebar
Support Post
3.
Left Side
Handlebar
2.
Right Side
Handlebar