Body Solid 1.3 - Manual (Page 14)

Handlebar Assembly (Cont.)
3. Using the 5mm Allen wrench, securely tighten 3 of the short button head screws with
washers on the bottom of each oval support post.
Note: Two of the washers are bent to match the shape of the side of the oval tube and 4 of
the washers are bent to match the shape of the front and back ends of the oval tube. Make
sure that you use the correct washer for each location.
Power Cord
The turn on switch, fuse and power connector are all located on the front right side of
your treadmill. You can now plug in the power supply and then attach the safety key.
10
I n s t a l l S u p p o r t Tu b e
Fa s t e n i n g S c r e w s a n d
B e n t Wa s h e r s
Po w e r C o r d
A t t a c h m e n t