Bissell 7100 - Manual (Page 9)

9
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
T
roubleshooting
Vacuum cleaner won’t run
Possible causes Remedies
1. Vacuum cleaner is not plugged in 1. Check electrical plug
2. Household fuse/circuit breaker 2. Check/replace fuse or circuit breaker
Decreasing suction or no suction
Possible causes Remedies
1. Floor nozzle, flexible hose, or extension wand is blocked 1. Remove each part and check for blockages
2. Filters are dirty 2. Check both filters and clean or replace
as needed
3. Dust bag is full 3. Replace with new dust bag
4. Crack or hole in flexible hose 4. Check hose and replace if needed
5. Hose is clogged 5. Remove hose, check for a clog and clear
6. Air flow regulator or variable suction control 6. Check for correct setting
is on low suction setting
Cord does not rewind fully
Possible causes Remedies
1. Cord may be twisted or wound unevenly 1. Gently pull the cord out and rewind
WARNING:
To reduce the risk of electric shock,
turn power OFF and disconnect
polarized plug from electrical outlet
before performing maintenance or
troubleshooting.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
ug110-4001_7100_507.indd 9 ug110-4001_7100_507.indd 9 5/22/07 5:01:22 PM 5/22/07 5:01:22 PM