24 en – Olympus VR-370 User Manual

Page 24

Advertising
background image

24 EN

Image size

Sets the number of recording pixels.

4608×3456

Suitable for printing pictures over A3 (11×17 in.).

4

3264×2448

Suitable for printing pictures up to A3 (11×17 in.).

n

2560×1920

Suitable for printing pictures up to A3 (11×17 in.).

3

2048×1536

Suitable for printing pictures up to A4 size (8.5×11 in.).

2

1600×1200

Suitable for printing pictures at A5 (5×7 in.).

1

1280×960

Suitable for printing pictures at postcard size.

7

640×480

Suitable for using pictures on emails.

0

1920×1080

Suitable for playing pictures on a TV (widescreen TV) and for printing on A5
(5×7 in.).

In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting

mode” (p. 57)

Registering one touch white balance

Registering one touch white balance

Select [ One Touch 1] or [ One Touch 2], face the camera toward a piece of white paper or other white
object, and press the

 button.

The camera releases the shutter and the white balance is registered. When the white balance was

previously registered, the registered data is updated.

The registered white balance data will not be cleared by turning off the power.

Perform this procedure under the light where the pictures will be actually taken.

When the camera settings are changed, the white balance must be registered again.

When the white balance cannot be registered, check that the white paper fi lls the screen, and then

perform the procedure again.

Advertising