Olympus VR-370 - Manual (Page 38)

38 EN
d Settings Menu 2
Adjusting the image processing Adjusting the image processing
function
function dd [Pixel Mapping] [Pixel Mapping]
● This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
● For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image
processing function starts.
Adjusting the brightness of the Adjusting the brightness of the
monitor
monitor dd [ [s s]]
To adjust the monitor brightness To adjust the monitor brightness
Submenu 2 Application
Bright/Normal
Selects the monitor brightness
depending on the surrounding
brightness.