Olympus PTEP12 - Manual (Page 10)

EN 9
EN
Using the diffuser
1 Install the strap of the port adapter to the Case
body.
2 Attach the diffuser to the port adapter.
3 Install the diffuser on the Case.
Install to fit together the convex part of the port
adaptor on the diffuser and the concave part of
the port on the Case.
Make sure that push until it clicks, and confirm it
installed firmly.
Removing diffuser (with port adapter) from the Case body
To remove the diffuser, pull the port adapter from the
Case body by rotating the diffuse 30°clockwise and
sliding the convex part.
Diffuser
Port adaptor
Port adaptor
Concave part Convex part
PT-EP12_EN.Book Page 9 Thursday, June 5, 2014 7:14 PM