Olympus PTEP12 - Manual (Page 14)

EN 13
EN
3. Installing the digital camera
Open the Case
1 Slide the lock knob towards the arrow direction (1 of figure below).
2 Slide and hold the slide lock towards the arrow direction (2 of figure below) and turn the open/close
dial clockwise (3 of figure below).
3 Turn the open/close dial to the position where it cannot be turned further.
4 Open the rear lid of the Case gently.
Attach the flash to the camera and raise the light emitting part
Attach the flash supplied with the camera.
Make sure to raise the light emitting part.
CAUTION:
• Do not exert too much force while turning the open/close dial. Doing so may damage the dial.
3
1
2
Slide lock
Open/close dial
Open
Lock knob
PT-EP12_EN.Book Page 13 Thursday, June 5, 2014 7:14 PM