Olympus IS-50 QD - Manual (Page 2)

2 3
Read this manual carefully before using your camera.
WARNING CONTENTS
NEVER ATTEMPT TO DISASSEMBLE THE CAMERA; IT CONTAINS A HIGH-
VOLTAGE CIRCUIT. IF THE INTERNAL PARTS OF THE CAMERA ARE
EXPOSED DUE TO DROPPING OR DAMAGE, REMOVE THE BATTERIES
IMMEDIATELY TO PREVENT FURTHER USAGE.
IN CASE OF MALFUNCTION, CONSULT YOUR NEAREST OLYMPUS DEALER
OR OLYMPUS SERVICE CENTER.
Indicates circumstances under which
mishandling resulting from ignoring this symbol
could result in personal injury or property
damage.
KEEP THE BATTERIES AWAY FROM FIRE. NEVER TRY TO
DISASSEMBLE, RECHARGE, OR SHORT-CIRCUIT BATTERIES.
KEEP THE BATTERIES OUT OF THE REACH OF CHILDREN. IF A CHILD
SWALLOWS A BATTERY, CONTACT A DOCTOR IMMEDIATELY.
Symbols used in this manual:
ț Pay particular attention to items in this manual enclosed in boxes .
ț Products shown in pictures and illustrations may be slightly different from
the actual unit.
Incorrect
Order
Manual operation Operation order Automatic operation
Beep
Attention
Depress halfway
Indicator on Indicator blinking
Names of parts
Camera Body................................4
Camera Body/LCD Panel ..............5
Viewfinder Display........................6
Using the strap ................................6
Diopter adjustment ..........................7
Loading and checking the batteries ..7
Loading the film ..............................8
Taking pictures
Programmed Auto (FULL AUTO)..9
Focus Lock ................................10
Unloading the film ..........................10
Flash photography
Setting the flash mode ..............11
Auto Flash ..................................12
[ ] Red-Eye Reduction Flash ..13
[ ] Fill-In Flash ........................13
Exposure modes
1. Direct Mode Select buttons ........14
[ ] Stop Action ....................14
[ ] Portrait ..............................15
[ ] Landscape..........................15
[ ] Night Scene ......................16
2. Exposure mode button ..............16
[ A ] Aperture Preferred Auto ....17
[ L.T. ] Long Time ....................18
[ ] Exposure Compensation ........19
[ ] Spot Metering ..................21
[ ] Selftimer/
[ ] Remote Control(Optional) ....22
[ ] Macro Shooting ................23
Restoring the Programmed Auto
[FULL AUTO] mode ......................23
Correcting the date and time ..........24
(Quartzdate models only)
Printing the date/time ....................25
(Quartzdate models only)
Care and storage ............................26
Specifications ................................27
Accessories (optional)....................28