Olympus IS-50 QD User Manual
Page 4
7
DIOPTER ADJUSTMENT
LOADING AND CHECKING THE BATTERIES
6
NAMES OF PARTS — Viewfinder Display
USING THE STRAP
ț
Attach the strap as shown.
y Autofocus frame
u Spot frame
i Flash
o Autofocus indicator
p Exposure compensation
(overexposure/underexposure)
1
2
3
Secure the strap
with the clasp.
Turn the diopter adjustment dial until the
autofocus frame is clear.
Use two 3 V lithium batteries (CR123A or DL123A).
If you are nearsighted, turn the dial up.
If you are farsighted, turn it down.
Make sure the power switch
is set to OFF before opening
the battery compartment
cover.
1
2
3
1
4
5
6
2
7
3
Turn the dial
1
on the battery
compartment cover to
. Hold
the notch
2
with your fingertip.
Open the cover
3
.
Insert the batteries
4
correctly.
Close the battery compartment
cover
5
. Turn the dial
6
to
to lock the cover.
Set the power switch
7
to ON
to check the remaining battery
power.
Batteries are OK. You can shoot.
Batteries are low and should be
replaced with new ones.
Batteries are dead and should be
replaced with new ones immediately.
lights (turns off automatically).
blinks and other indicators are
displayed normally.
blinks and other indicators go out.