Olympus VH-410 - Manual (Page 32)

32 EN
Using an Eye-Fi card Using an Eye-Fi card dd [Eye-Fi] [Eye-Fi]
Submenu 2 Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off Disable Eye-Fi communication.
When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Use the Eye-Fi card in compliance with the laws and
regulations of the country where the camera is used.
In locations such as on an airplane, where the Eye-Fi
communication is prohibited, remove the Eye-Fi card
from the camera, or set [Eye-Fi] to [Off].
This camera does not support the Eye-Fi card’s
Endless mode.
Selecting a method for connecting the Selecting a method for connecting the
camera to other devices
camera to other devices
dd [USB Connection] [USB Connection]
Submenu 2 Application
Auto
Set to select the connection method
each time the camera is connected
to another device.
Storage Connect as a card reader.
MTP
As a portable device, connect to
PC loaded with Windows Vista or
Windows7.
Print
Select when connecting to a
PictBridge-compatible printer.
Select [Storage] to use the supplied software.
Refer to “Connecting with a computer” (p. 37) for the
connection method with a computer.
Turning on the camera with the Turning on the camera with the q q
button button dd [ [ q q Power On] Power On]
Submenu 2 Application
No
The camera is not turned on. To turn
on the camera, press the n
button.
Yes
Press and hold the q button to turn
the camera on in the playback mode.
Saving the mode when the camera is Saving the mode when the camera is
turned off
turned off dd [Keep [Keep z z Settings] Settings]
Submenu 2 Application
Yes
The shooting mode is saved when
the camera is turned off and is
reactivated the next time the camera
is turned on.
On
The shooting mode is set to P mode
when the camera is turned on.