Olympus VH-410 - Manual (Page 8)

8 EN
Learning how to use the camera
● Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
● Select the shooting mode, and press the shutter
button to shoot a still image.
● To shoot a movie, press the n button.
● Set the shooting functions using the function menu or
the setup menu.
● To view images, press the q button to switch to
playback mode.
● Set the playback functions using the setup menu.
● To return to standby mode, press the q button
again, or press the shutter button halfway down and
then release it.
● Press and hold the q button while the camera is
turned off to start up the camera in the playback mode.
● In this case, pressing the q button again sets the
camera to the standby mode.
Using the Touch Panel
Use the touch panel by touching the screen with your
fi nger.
● The touch panel can be used for operations marked
with

in this manual.
● Using a screen protector or gloves may cause poor
operability.
● Use a stylus pen (supplied) when it is diffi cult to
operate with your fi nger.
Using for the shooting mode Using for the shooting mode
By touching the screen, the subject to be focused on can
be set or the picture can be taken.
Every time  is touched, the operation is changed.
●  : The subject that is touched is focused on and
the picture is taken automatically.
●  : The subject that is touched is AF locked.
Press the shutter button to take the picture.
Touch  to release the AF lock. Focus lock ends
when the shutter is released.
16 M
0:00:34 0:00:34 44 N ORM