Olympus FL-36R - Manual (Page 13)

13
EN
Flash control modes
Select the flash control mode according to the subject and the shooting
conditions. Press the MODE button repeatedly to change the flash
control mode.
Control
panel display
Control operation Main application
Ref.
page
The flash light intensity is
controlled automatically
according to the camera’s setup.
The flash will be adjusted based
on the brightness taken through
the camera’s lens.
Usually use this
mode with a camera
with communication
capability.
P. 12
The flash light intensity is
controlled automatically
according to the camera’s setup.
The flash will be adjusted based
on the brightness captured
by auto light receptor on the
electronic flash. If the camera has
communication
capability, this mode
can be used only
when the camera
is an AUTO-
compatible model.
P. 16
In this mode, the flash is emitted
according to the guide number
setting.
Shooting using
manual flash.
P. 17
Super FP flash. This mode allows
you to use flash photography
even at shutter speeds faster
than the flash synchronization
speed of the camera. In AUTO
mode the flash light intensity
is controlled automatically. In
MANUAL mode the flash is
emitted according to the guide
number selected.
Outdoor shooting
using flash, such as
fill-in flash shooting
in the daytime.
P. 18,
20
x
Notes
Certain modes may be unavailable depending on the shooting mode set
on the camera and the functions of the camera in use.
It is not possible to select an unavailable mode.
r2067_e_000_cs2j.indb 13 r2067_e_000_cs2j.indb 13 2007/10/01 10:49:51 2007/10/01 10:49:51