Olympus VN-405PC - Manual (Page 29)

29
4
EN
Menu setting method
M
e
nu
set
ting
m
e
th
od
Rec Menu
Rec Level
Recording sensitivity is adjustable to meet
recording needs.
1 Select [Rec Level] from the menu
on the [Rec Menu].
[High]:
High recording sensitivity suitable for
conferences with many participants
and recording audio at a distance or
low volume.
[Low]:
Standard recording sensitivity
suitable for dictation.
Note
• When you would like to clearly record a
speaker’s voice, set [Rec Level] to [Low]
and hold recorder’s built-in microphone
close to the speaker’s mouth (5-10 cm).
Rec Mode
Besides stereo* and monaural recording,
you can also select recording with priority to
sound quality, and recording with priority to
recording time. Select the recording mode
appropriate to your needs.
* VN-406PC only
1 Select [Rec Mode] from the menu
on the [Rec Menu].
When [MP3]* is selected:
Stereo recording
[192kbps], [128kbps]
Monaural recording
[48kbps]
* VN-406PC only
When [WMA] is selected:
Monaural recording
[32kbps], [16kbps], [5kbps]
Notes
• To record a meeting and lecture clearly,
set other than [5kbps] in [Rec Mode].
For VN-406PC:
• If a recording is made in stereo modes
([192 kbps] or [128 kbps]), it will be a
monaural recording through the built-in
microphone, and the same audio will be
recorded to both Left channel (Lch) and
Right channel (Rch).
• When an external monaural microphone
is used while [Rec Mode] is set to a stereo
recording mode, audio will be recorded
to the L channel only.
Low Cut Filter
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly.
1 Select [Low Cut Filter] from the
menu on the [Rec Menu].
[On]:
Enables the Low Cut Filter function.
[Off]:
Disables this function.