Olympus VN-405PC - Manual (Page 32)

32
4
EN
Menu setting method
M
e
nu
set
ting
m
e
th
od
Play Menu
Voice Filter
For VN-406PC:
The recorder has a Voice Filter Function to
cut low and high frequency tones during
normal, fast, or slow playback, and enable
clear audio playback.
1 Select [Voice Filter] from the
menu on the [Play Menu].
[On]:
Enables the Voice Filter function.
[Off]:
Disables this function.
Play Mode
You can select the playback mode that fits
your preference.
1 Select [Play Mode] from the
menu on the [Play Menu].
When [Playback range] is selected:
[File]:
Selects the current file.
[Folder]
Selects the current folder.
When [Repeat] is selected:
[On]:
Sets to repeat playback mode.
[Off]:
Disables this function.
Notes
• In [File] mode, when the recorder comes
to the end of the last file in the folder,
[End] flashes for two seconds on the
display and the recorder stops at the start
of the last file.
• In [Folder] mode, when the recorder
comes to the end of the last file in the
folder, [End] flashes for two seconds on
the display and the recorder stops at the
start of the first file in the folder.
Skip Space
This function enables you to skip (forward)
or reverse skip (rewind) a file being played
for a set period. This function is convenient
for quickly skipping to another playback
position or repeatedly playing back short
phrases.
1 Select [Skip Space] from the
menu on the [Play Menu].
When [Forward Skip] is selected:
[File Skip] [10 sec. Skip]
[30 sec. Skip] [1 min. Skip]
[5 min. Skip] [10 min. Skip]
When [Reverse Skip] is selected:
[File Skip] [1 sec. Skip] – [5 sec. Skip]
[10 sec. Skip] [30 sec. Skip]
[1 min. Skip] [5 min. Skip]
[10 min. Skip]
Note
• If there is an index mark/temp mark or
a cue closer than the skip space, the
recorder will forward skip/reverse skip to
that position.