Olympus TG3 - Manual (Page 31)

31 EN
Using shooting options (Set by direct button)
Some items are not available in some shooting modes. g “List of settings
available in each shooting mode” (P. 100)
Flash
You can use a flash when shooting.
1
Press the # button (I) to display options.
2
Use HI to choose a flash mode and press A.
# AUTO Auto flash
The flash fires automatically in low
light or backlight conditions.
! Red-eye reduction flash
This function allows you to reduce
the red-eye phenomenon.
# Fill-in flash
The flash fires regardless of the
light conditions.
$ Flash off The flash does not fire.
#RC Remote Control
For details, see “Taking pictures
with the Olympus Wireless RC
Flash System” (P. 95).
#SLV Slave
The commercially-available slave
flash that is synchronized with the
camera flash is used for taking
pictures. The flash intensity setting
can be adjusted.
q LED On
The LED turns on when a picture
is taken. This is effective for taking
close up pictures.
• In [ !](Red-eye reduction flash), after the pre-flashes, it takes about
1 second before the shutter is released. Do not move the camera until
shooting is complete.
• [ !](Red-eye reduction flash) may not work effectively under some
shooting conditions.
• In A mode, only #AUTO and $ can be selected.