Olympus TG3 - Manual (Page 65)

65 EN
Connecting the camera to a smartphone
If you use the wireless LAN functions on the camera to connect to a
smartphone with Wi-Fi connectivity, you can then use the smartphone app
to do things like importing images to your smartphone and operating the
camera by remote control. You can also update the A-GPS data and import
and manage the GPS log and images recorded on the camera.
For further details on the smartphone app, go to the following addresses.
OLYMPUS IMAGE SHARE (OI.Share):
http://oishare.olympus-imaging.com/
OLYMPUS IMAGE TRACK (OI.Track):
http://oitrack.olympus-imaging.com/
Before using the wireless LAN function, read “Precautions when using the
wireless LAN function” (P. 107).
If using the wireless LAN function in a country outside the region where the
camera was purchased, there is a risk that the camera will not conform to the
wireless communication regulations of that country. Olympus will not be held
responsible for any failure to meet such regulations.
As with any wireless communication, there is always a risk of interception by
a third party.
The wireless LAN antenna is contained in the camera grip. Where possible,
avoid covering the antenna with your hands.
During wireless LAN connection, the battery will run down faster. If the battery
is running low, the connection may be lost during a transfer.
Connection may be diffi cult or slow in proximity to devices that generate
magnetic fi elds, static electricity or radio waves, such as near microwaves,
cordless telephone.