Menu setting method, Play mode, Reverb – Olympus LS-5 User Manual

Page 45: Euphony

Advertising
background image



Menu Setting

4

4

Play Menu

Play Mode

There are six play modes. You can select whether to play by file or folder, or all files
stored in the recorder.

Setting:
[

File]: Stop after playing back the current file.

[

File Repeat]: Play the current file repeatedly.

[

Folder]: Play files continuously in the current folder until the last file and stop.

[

Folder Repeat]: Play all files in the current folder continuously.

[

All]: Play all files in the selected memory continuously and stop.

[

All Repeat]: Play all files in the selected memory continuously and repeatedly.

• In [

File] mode, when the recorder comes to the end of the last file in the folder, [End] flashes

for two seconds on the display and the recorder stops at the start of the last file.

• In [

Folder] mode, when the recorder comes to the end of the last file in the folder, [End]

flashes for two seconds on the display and the recorder stops at the start of the first file
in the folder.

• In [

All] mode, after playing the last file in the folder, the recorder will start playing from the

first file in the next folder. When it comes to the end of the last file in the recorder, [

End]

flashes for two seconds on the display and the recorder stops at the start of the first file
in the recorder.

Reverb

You can enjoy the reverberant sound of various space sizes such as from

the recording studio to the dome.

Setting

:

[

Normal]: Disables the reverb function. Select this when playing back original

sounds as they are.
[

Studio] [Club] [Hall] [Dome]: Select the preferred acoustical environment.

• When playing back WAV format files using these playback results, the sampling rate

and bit rate will be converted downward from 96 kHz to 48 kHz and 24 bit to 16 bit,
respectively.

• This function is only available during playback. This recorder cannot perform

recording by using the playback results.

• When you adjust the various sound quality settings related to playback on the

recorder, the audio output signal sent out from the

EAR jack will change as well.

EUPHONY

This recorder is equipped with “

EUPHONY MOBILE”, the latest in surround sound systems

which combines bandwidth correction, expansion technology, and virtual acoustical
source processing technology. In addition to its natural, expansive feel, the recorder is
equipped with the exceptional feature wherein listeners are less prone to developing
an compressed or closed-in feel, or to growing tired over extended listening. On top of
this, listeners are less prone to developing an oppressed or closed-in feel, or to growing
tired over extended listening. Level adjustments of the [

EUPHONY] setting can be set

to four stages according to preference.

Setting:
[

Normal]: Disables this function. Select this when playing back original sounds

as they are.
[

Natural]: This mode achieves natural bandwidth correction and acoustical

field expansion.
[

Wide]: This mode has an even more expansive feel.

[

Power]: This mode focuses more on lower sound registers.

• When playing back WAV format files using these playback results, the sampling rate and

bit rate will be converted downward from 96 kHz to 48 kHz, 88.2kHz to 44.1kHz and 24 bit
to 16 bit, respectively.

• This function is only available during playback. This recorder cannot perform

recording by using the playback results.

• When you adjust the various sound quality settings related to playback on the

recorder, the audio output signal sent out from the

EAR jack will change as well.

Menu Setting Method

Advertising